- Yopitek Ltd/
- Products/
- SDRLAB Software-Defined Radio Modules/
- SDRLab TRX-duo — Dual-Channel 16-bit ZYNQ SDR Platform/
SDRLab TRX-duo — Dual-Channel 16-bit ZYNQ SDR Platform
The SDRLab TRX-duo is a dual-channel 16-bit SDR transceiver platform built on a Xilinx Zynq 7010 SoC and compatible with the Red Pitaya software ecosystem, for advanced radio research and amateur radio. It has 2 × LTC2208 16-bit ADCs at 125 MS/s and two 14-bit DAC transmit channels. Contact Yopitek for a quotation in Taiwan.
Features#

- Dual-channel transceiver design (2 RX + 2 TX), fully compatible with the Red Pitaya software ecosystem
- 2× LTC2208 high-precision 16-bit ADC delivers wide dynamic range and high sensitivity
- 14-bit DAC for dual-channel transmission
- On-board Xilinx Zynq 7010 SoC (dual-core ARM Cortex-A9 + FPGA) — run decoding software directly on the device
- Supports remote network deployment for building remote SDR receive stations
- Compatible with leading SDR software: HDSDR, SDR#, PowerSDR, SDR Console V3, and more
Specifications#
| Specification | Value / Description |
|---|---|
| Processor | Dual-core ARM Cortex-A9 (Zynq 7010 SoC) |
| FPGA | Xilinx Zynq 7010 |
| RAM | 512 MB |
| Receive Channels | 2 (SMA connectors) |
| ADC Resolution | 16-bit (LTC2208) |
| ADC Sample Rate | 125 MS/s |
| ADC Full-Scale Voltage | 0.5 Vpp / −2 dBm |
| Input Voltage Range | DC max 50 V (AC-coupled), 1 Vpp RF |
| Input Protection | RF transformer + AC coupling |
| Transmit Channels | 2 |
| DAC Resolution | 14-bit |
| DAC Sample Rate | 125 MS/s |
| Transmit Output Voltage | 1 Vpp / +4 dBm |
| Transmit Load Impedance | 50 Ω |
| Ethernet | 1 Gbit |
| USB | Type-C (USB 2.0) |
| Wi-Fi | External Wi-Fi dongle required (not included) |
| Expansion GPIO | 16× digital I/O, 4× analog input, 4× analog output |
| Analog Input Voltage Range | 0–3.3 V |
| Analog Output Voltage Range | 0–1.8 V |
| Analog Input Sample Rate | 100 kS/s / 12-bit |
| Communication Interfaces | I2C, UART, SPI |
| Expansion Power Output | +3.3 V |
Use Cases#
- HF (shortwave) amateur radio transceiving (CW, SSB, AM, FM)
- Remote SDR receive station deployment (full network remote access)
- HF spectrum analysis and signal research
- Amateur radio experimentation (contests, astronomical observation)
Manufacturer store page (OpenSourceSDRLab)
Frequently Asked Questions
What processor and interfaces does the SDRLab TRX-duo have?
It uses a Xilinx Zynq 7010 SoC with a dual-core ARM Cortex-A9, 512 MB RAM, 1 Gbit Ethernet and USB Type-C (USB 2.0). Wi-Fi requires an external dongle, which is not included.
What are the receive and transmit specifications of the TRX-duo?
Receive uses 2 × LTC2208 16-bit ADCs at 125 MS/s with 0.5 Vpp / −2 dBm full scale. Transmit uses 2 channels of 14-bit DAC at 125 MS/s, 1 Vpp / +4 dBm into 50 Ω.
Which software is the TRX-duo compatible with?
It is compatible with the Red Pitaya software ecosystem and with SDR software such as HDSDR, SDR#, PowerSDR and SDR Console V3.
What expansion I/O does the TRX-duo provide?
It provides 16 digital I/O, 4 analog inputs (0–3.3 V, 100 kS/s, 12-bit) and 4 analog outputs (0–1.8 V), with I2C, UART and SPI plus a +3.3 V supply output.
Related products
- OpenSourceSDRLab RTL-SDR Blog V4 — Entry-Level SDR Receiver
- SDRLab Flipper Zero 5G Add-On Board — Dual-Band Wi-Fi Security Research Module
- SDRLab Flipper Zero Ethernet Testing Module
- SDRLab Flipper Zero NRF24 Module — 2.4GHz Wireless HID Research Module
- SDRLab Flipper Zero WiFi Multiboard — Multi-Module Expansion Board
- SDRLab H4M — Portable HackRF + PortaPack Bundle