- Yopitek Ltd/
- Products/
- SDRLAB Software-Defined Radio Modules/
- SDRLab H4M — Portable HackRF + PortaPack Bundle/
SDRLab H4M — Portable HackRF + PortaPack Bundle
The SDRLab H4M is a portable SDR bundle pairing a HackRF One (R10C) with a PortaPack H4M running Mayhem firmware, for authorized RF research and education. It covers 1 MHz–6 GHz with 20 MHz maximum bandwidth, a 3.2-inch touchscreen and a 2500 mAh battery. Contact Yopitek for a quotation in Taiwan.
Features#

- Comprehensive redesign addressing shortcomings of previous PortaPack generations, plus a new GPIO expansion port
- Single power switch for a complete hard shutoff — no more phantom battery drain
- Advanced battery management IC with real-time display of battery percentage, voltage, and current
- Matte screen dramatically improves readability in bright outdoor environments
- 360° flat rotary knob (inspired by the iPod click wheel) — portable-friendly and resistant to accidental input
- USB-C connector for fast charging and broad compatibility
- Built-in speaker and microphone; audio source switches automatically when headphones are plugged in
- GPIO expansion port for custom add-ons
- Bundle includes an R10C HackRF with Mayhem firmware support
- 3.2" 240×320 matte touchscreen, microSD card slot, and 3.5 mm headphone/microphone jack
Specifications#
| Specification | Value / Description |
|---|---|
| Bundled Hardware | HackRF One (R10C) + PortaPack H4M PCB |
| Frequency Range | 1 MHz – 6 GHz (per HackRF One specs) |
| Maximum Bandwidth | 20 MHz |
| ADC Resolution | 8-bit |
| RF Connector | SMA Female |
| Display | 3.2" 240×320 matte touchscreen LCD |
| Power Port | USB-C (fast charging) |
| Battery Capacity | 2500 mAh lithium battery |
| Power Management | Advanced battery management IC (%, voltage, current readout) |
| Audio | Built-in speaker + microphone, automatic headphone switching |
| Expansion Interface | GPIO port for custom add-ons |
| Storage | microSD card slot |
| Headphone / Microphone | 3.5 mm headphone/microphone jack |
| Enclosure | Clear ABS injection-molded shell |
| Firmware | Mayhem Firmware (pre-flashed or user-installable) |
| OS Support | Windows, macOS, Linux, Android (via USB host computer) |
| Software Compatibility | GNU Radio, SDR#, GQRX, and more (USB-connected mode) |
Use Cases#
- Portable RF security audits and penetration testing
- Wireless spectrum scanning and analysis
- Signal capture, replay, and recording
- GPS simulation
- ADS-B aviation surveillance
- AIS maritime tracking
- WiFi / GSM / ISM band analysis
- Digital signal demodulation and modulation
- Wireless protocol reverse engineering
- Field portable SDR operations
📖 User Manual#
The complete beginner guide for getting started with your SDRLab H4M — from unboxing to advanced signal operations.
---Manufacturer store page (OpenSourceSDRLab)
Frequently Asked Questions
What frequency range and bandwidth does the SDRLab H4M cover?
The bundled HackRF One covers 1 MHz to 6 GHz with a maximum bandwidth of 20 MHz and 8-bit ADC resolution. The RF connector is SMA female.
What is included in the SDRLab H4M bundle?
The bundle includes a HackRF One (R10C) and a PortaPack H4M PCB with Mayhem firmware support. The PortaPack adds a screen, battery, speaker and microphone.
What are the display, battery and ports of the H4M?
It has a 3.2-inch 240×320 matte touchscreen, a 2500 mAh lithium battery, USB-C fast charging, a microSD slot and a 3.5 mm headphone/microphone jack. A GPIO port supports custom add-ons.
Which firmware and computer software does the H4M support?
It runs Mayhem firmware, and in USB-connected mode it works with GNU Radio, SDR# and GQRX on Windows, macOS, Linux and Android hosts. Use transmit functions only where local regulations allow.
Related products
- OpenSourceSDRLab RTL-SDR Blog V4 — Entry-Level SDR Receiver
- SDRLab Flipper Zero 5G Add-On Board — Dual-Band Wi-Fi Security Research Module
- SDRLab Flipper Zero Ethernet Testing Module
- SDRLab Flipper Zero NRF24 Module — 2.4GHz Wireless HID Research Module
- SDRLab Flipper Zero WiFi Multiboard — Multi-Module Expansion Board
- SDRLab TRX-duo — Dual-Channel 16-bit ZYNQ SDR Platform