↓ Skip to main content
  1. Blog/

Building Fleet GPS Tracking and Telematics Systems: EM7455/MC7455 Built-in GNSS Explained

Table of Contents

In one sentence: for a fleet management system, the smartest approach is to get two jobs out of a single chip. The Sierra Wireless EM7455 and MC7455 use their built-in GNSS to calculate precise truck coordinates on one side, while reporting back to your office in real time over 4G on the other. No separate GPS module needed, saving space, money, and headaches.

A “fleet telematics system” sounds sophisticated, but the principle is simple: collect the vehicle’s position, speed, and engine status, then send it all back to a server over the network.

Hardware engineers used to have a rough time of it. They had to squeeze a GPS chip and a 4G module onto a tiny board, then deal with the power and antenna interference between the two. But now, pick the right cellular module and everything gets much simpler. In this article we use the official spec sheets for the EM7455 and MC7455 to show you the “hidden superpower” of these two modules: GNSS satellite positioning.

Technical source: Sierra Wireless official specifications (EM7455, MC7455). Compiled by Yopitek.


How Accurate Is the GPS in These Modules?
#

Do not assume the bundled positioning feature is a toy. The GNSS (Global Navigation Satellite System) receiver in these two modules is seriously well specified, and their positioning capability is identical:

MeasurementOfficial SpecWhat It Means for Your Fleet
Supported constellationsGPS, GLONASS, BeiDou, Galileo (30 channels tracked simultaneously)More satellites means less chance of getting lost, even in dense urban canyons.
Time to first fixHot start 1 second, cold start 32 secondsA truck briefly loses signal in a tunnel, then reacquires position within 1 second of exiting.
AccuracyHorizontal error under 2 meters (50% probability)You can even tell which lane the vehicle is stopped in.
Speed accuracyError under 0.2 m/sSpeed and idling data you can trust when judging driver behavior.
Tracking sensitivity-160 dBmWeak signals are still captured even behind tinted film or at the edge of an underpass.

EM7455 vs MC7455: Which One Should You Buy?
#

If the positioning capability is identical and both are Cat 6 4G (300Mbps down / 50Mbps up), how do you choose? Simple: look at your slot and your special requirements.

  1. The slot decides everything: the EM7455 is M.2 (42mm long), while the MC7455 is the older mPCIe form factor. Buy the one that matches your motherboard.
  2. Independent GNSS switch (W_DISABLE2#): some secure facilities require “no positioning”. The EM7455 has a dedicated pin that turns off GPS by itself while keeping the 4G link running. The MC7455 has no such hardware switch.

Pitfall Guide 1: You Don’t Need to Power the Active Antenna Yourself
#

Vehicle environments are harsh, and the vehicle body’s metal often blocks signals, which is why everyone uses an “active GNSS antenna” (one with a built-in amplifier in the antenna head).

Active antennas need power. Hardware engineers used to have to run a 3.3V line across the board to feed one. But these two modules are thoughtful: the GNSS antenna connector supplies power itself! The spec sheet is explicit: it outputs 3.0V to 3.25V, supplying up to 100mA. That is plenty for 99% of the active vehicle antennas on the market. Just snap the antenna on and you are done.


Pitfall Guide 2: Roof-Mounted Antenna? Watch Out for Regulatory Fines
#

If you plan to run the antenna outside the vehicle (for example, mounted on a truck roof), pay special attention to this red-flag warning from the official spec sheet:

FCC and IC regulations strictly prohibit the use of external vehicle-mounted antennas on Band 30 (2305–2315MHz)! Mobile devices must also keep antenna gain at or below 1dBi in this band.

What does this mean? If you plan to sell your product in North America, or your equipment will use Band 30, you must not run that 4G antenna outside the vehicle. This regulatory trap easily sinks products during certification testing. When designing your enclosure, keep the 4G antenna inside the vehicle.


Summary
#

Building a stable, accurate fleet telematics system really does not need to be complicated. Pick the EM7455 or MC7455, plug it into your board, attach a standard active GPS vehicle antenna, and let the module do the rest. Blazing fast time-to-fix (1 second hot start), strong sensitivity (-160 dBm), and 4G connectivity that uploads while moving will keep your fleet management platform real-time and smooth.

Purchasing Information (Call To Action)
#

Developing a vehicle terminal and need to source the EM7455 or MC7455? Still have questions about antenna configuration or motherboard integration? Yopitek offers complete hardware solutions and first-line technical support. Contact us: [email protected] Browse the lineup: Sierra Wireless Modules