↓ Skip to main content
  1. Blog/

Can DD-WRT, ROOter, or pfSense Connect a Sierra Card? EM7455, EM7565, MC7455 Support Comparison Across Three Platforms

Table of Contents

Want to plug a Sierra Wireless module (EM7455, EM7565, or MC7455) into your router and pair it with DD-WRT, ROOter, or pfSense? The answer is that all three can work, but the effort involved varies a lot. These modules talk to the host over USB using QMI, MBIM, or AT commands, so the Linux camp of ROOter and DD-WRT naturally has the best support. pfSense, on the other hand, sits on a FreeBSD base that never appears in the official specifications, so getting it working comes down to a bit of luck. This article uses the official specifications to break down the real support picture on all three platforms.

TL;DR: Want to plug a Sierra Wireless module (EM7455, EM7565, or MC7455) into your router with DD-WRT, ROOter, or pfSense? All three can work, but the effort varies a lot. ROOter and DD-WRT are in the Linux camp with the best support. pfSense runs on FreeBSD, which is absent from the official specifications, so getting it working relies on luck.

In one sentence: ROOter (the OpenWrt derivative) offers the best support and the fewest pitfalls; DD-WRT works, but you will need to be comfortable with Linux; pfSense carries the highest risk because the vendor never lists its OS as supported.

Many enthusiasts and enterprise MIS staff receive a Sierra Wireless EM7455, EM7565, or MC7455 and immediately want to drop it into an open source router as a failover WAN link. Keep in mind that the vendor never guarantees support for any particular open source firmware. What matters is the underlying operating system. We went through the official specifications to dig out the compatibility facts for you.

Reference: Sierra Wireless official specifications (EM7455, EM7565, MC7455). Compiled by Yopitek.


Choosing Between the Three Platforms in 30 Seconds
#

Router FirmwareUnderlying OSCan It Connect a Sierra Module?In Short
ROOter (OpenWrt)Linux✅ Best choiceThe specification lists Linux QMI/MBIM support, tutorials are everywhere, and errors are easy to trace.
DD-WRTLinux✅ Workable, takes some skillAlso Linux underneath, but fewer online tutorials, and you may need to compile drivers yourself.
pfSenseFreeBSD⚠️ Hit or missThe official documentation never mentions FreeBSD. Whether it works depends entirely on whether FreeBSD community maintainers have written a driver.

How Do the Modules Talk to the Router?
#

These modules are not plug and play USB sticks. The router has to understand how to communicate with them, using one of three protocols: QMI, MBIM, or the traditional AT commands.

According to the specifications, the officially supported operating systems for the three modules look like this:

  • EM7455: QMI (Windows 7/Linux/Android), MBIM (Windows 8.1/10), Linux SDK available.
  • EM7565: QMI (Linux/Android), MBIM (Windows 8.1/10/Linux), Linux SDK available.
  • MC7455: QMI (Windows 7/legacy), MBIM (Windows 8.1/10), Linux SDK available.

Notice anything? The common denominator is Linux! That is exactly why ROOter and DD-WRT are so well positioned. By contrast, the FreeBSD that pfSense runs on is not on the list at all.


Hardware Showdown: What Sets the Three Modules Apart?
#

ItemEM7455EM7565MC7455
Form FactorM.2 (67-pin)M.2 (67-pin)mPCIe (52-pin)
ChipsetMDM9230MDM9250MDM9230
Speed ClassCat 6 (300/50 Mbps)Cat 12 (600/150 Mbps)Cat 6 (300/50 Mbps)
Antenna ConnectorMHF4MHF4U.FL
Operating Temperature-40°C ~ +85°C-40°C ~ +85°C-40°C ~ +85°C

So what does this mean? If you want maximum speed, go with the EM7565 (Cat 12). If your old router only has an mPCIe slot, the MC7455 is your only option. If you want to use an M.2 module on an mPCIe board, buy an adapter and double check the antenna connectors, because U.FL and MHF4 are not interchangeable.


Pitfall Guide: The Most Common Mistakes
#

  1. Assuming it works right out of the box: without the qmi_wwan or cdc_mbim driver on the router, the module will never respond no matter how long you leave it plugged in.
  2. Forgetting that antenna connectors differ: the MC7455 uses the larger U.FL connector, while the EM7455 and EM7565 use the tiny MHF4. Buying the wrong cable will frustrate you.
  3. Expecting to use the PCIe lane: the specification states that the EM7565 PCIe pins are reserved for future use, so just treat it as a USB device.

Conclusion: Which Combination Should You Choose?
#

  • I am a beginner / I want a stable setup: go with ROOter + EM7455 (or MC7455). This is the combination with the most resources and the least friction.
  • I want the fastest speed: go with ROOter + EM7565.
  • I am a hardcore pfSense fan: check first whether the latest FreeBSD drivers are ready, or your purchase will end up as a paperweight.

As long as you confirm the slot is correct, the antenna connector is right, and the OS has a matching driver, these industrial grade modules will absolutely give your router a reliable failover link.

Where to Buy (Call To Action)
#

Not sure whether your router can take any of these cards, or cannot find a suitable adapter board and antenna? Yopitek offers complete hardware solutions and technical consultation. Contact us: [email protected] Product links: EM7455 | EM7565 | MC7455

Frequently Asked Questions

Which is better for Sierra modules, ROOter or OpenWrt?

ROOter is a derivative firmware of OpenWrt. Both run on the Linux stack and are explicitly supported in the official specifications, which is why they are the most recommended options.

Can pfSense connect a Sierra 4G module?

pfSense runs on FreeBSD, which is not listed as a supported OS in the official specifications. Whether it works depends on the maturity of community drivers, so the risk is higher.